Description

Material:

• Mild Steel.
• Stainless Steel.
• Aluminum.
• Timber/ wood Panels.
• All types of Architectural Materials.

Finish:

• Camouflage Finish.
• Powder Coated.
• Hot Dip Galvanized.
• Hot Dip Galvanized with Powder Coat.
• 2-Pack Painted Finish.

Features:

• High Speed operations.
• Architectural Design.
• Gate widths up to 15 meters.
• Trouble Free Operation.

Drive System:

• Drive motors range from: – 24 volt.
– 240 volt.
– 3-phase (only requiring single phase input).
• Manual release in the event of power failure.
• Opening & Closing Speed from 200mm upto 950mm / second.
• All essential safety devices connected to gate operator.
• Control with Electrical relay controls or optional PLC Controls.

Safety Devices (Optional):

• Loop Detectors.
• Photo Electric Beams (PE Beams).
• Safety Sensitive Edges.

Other Options:
• Flashing light to notify gate operation.
• Battery Back up in the event of power failure.
• Integration with Access Control systems.
• Integration with Fire Alarm Control systems.
• Full Range of Locking Mechanisms.
• Signages.

Sidak takes pride in deputing its staff to assist you in the decision making and advising of the correct sliding gate requirements & design parameters for your site along with the safety devices required for your specific application, along with the pre site preparation required for installation of the systems purchased.

 

Specifications

 

Gate Frame	The gate should be made up of 80 x 50 – 3mm thick, 150 x 50 – 3mm thick tubular frames , 2 mm sheet complete covering door & 100x100x5mm thick tubular sections as pillar element One coat of Zn- based primer with proper pre-treatment
Electric motor capacity	Approx. 1,1 kW, 230V, 50 Hz Physical stopper should be provided at both ends Depth of track from FFL is approx120mm and should be supported by concrete foundation.
Safety	Safety Buffer detector/Loop detector Radio remote control
Operation time	Opening/Closing 12-15 sec approx
Operation temperature range	20 to +70°C
Power failure / emergency	Manually operated Handle
Gate Dimension Gate clear opening width Total Gate length Gate height	–   Up to 15 mtr.s Up to 18 mtr.s Upto 3.5 mtrs.
Operation	Can be Integrated with access control panel/Reader
Features	Manual Operation in case of power failure Very silent operation Problem detection causes the gate movement to stop if an The advance electronic control unit have the facility to set operation time, partial opening, reflex closing, step by step control, stop safety, reverse safety etc Adjustable Bearing Hinges Custom designed to suit individual applications.